Summer is one of the most productive and challenging times of year for most construction contractors. Problems like extreme weather, an overly busy schedule, and poor air quality can all cause delays in production and poor overall efficiency. Sometimes these problems can even cause injuries, poor morale, and loss of work.
These problems have solutions. Using the right tools and fasteners, such as BECK's patented diamond coating for fasteners, for example, can help make your season more productive and profitable. The diamond coating ensures reduced friction, fewer wood fibers destroyed, and higher withdrawal values, allowing you to work faster when using nails and staples made with this innovative technology.
Additionally, training workers to stay safe in challenging conditions and following summer-specific protocols are essential steps to overcome some of summer's biggest challenges. See below for more details on these challenges and what you can do about them.
Read More
Topics:
Pneumatic Nailers,
Scrail Fasteners,
Tools,
Staples,
pneumatic tools,
Staplers,
scrail,
construction site,
power tools,
fastening system,
summer,
construction,
diamond coated,
diamond coated fasteners
Not all contractors work in a climate where it’s warm enough all year round to pour concrete without special considerations. There are myths that say you shouldn’t work with concrete in the cold—but the truth is, you can still get the job done. You’ll just need to take some extra measures to make sure the concrete doesn’t end up brittle or cracked.
We’ll show you a few tips to work with concrete in cold weather, and we’ll also show you one of our favorite tools for concrete and masonry work, which is the ET&F® (a BECK member) Aerico® 90 tool and fastener system.
Read More
Topics:
fasteners,
pneumatic tools,
collated fasteners,
fastening system,
cold weather,
pins,
concrete,
masonry,
pneumatic system
It's not difficult for non-industry people to get a bit confused about the differences between mobile, modular, and manufactured homes. The three seem similar enough to almost sound like the same basic thing, plus there are many practical similarities between the three that you as a contractor can use tools such as BECK’s F44AC Nailer to rapidly assemble any of these housing structures. However, though they may sound the same and have some similar building requirements, they are most definitely not the same. There are some practical differences between the three that are worth mentioning in further detail.
Read More
Topics:
Tools,
pneumatic tools
Bathroom remodeling can either be quick and easy or complicated and expensive. Which is the case depending on how large the bathroom is, how old it is and of course, how extensive your client wants the renovation to be. Here we're focusing on renovation jobs more complex than simply replacing the sink or toilet, and we're going to cover several key installation and remodeling tips for avoiding easy-to-make mistakes.
Read More
Topics:
Tools,
pneumatic tools
The deep chill of winter can grind many outdoor projects to a frozen halt, and construction is no exception. However, it doesn't have to be this way. Prefab and mid-sized steel frame structure assembly is one superb solution to deep cold. Especially if you have the right tools for this type of job, the entire project can progress safely and exceptionally fast. BECK's ET&F® brand of cold-resistant tools and fastening equipment for steel building assembly, are designed to deliver both speed and strength. They can be applied to steel frame construction work, in innovative ways that allow rapid-fire fastening without having to waste time on pre-drilled holes, or difficult screwing techniques. Here are a few other reasons why steel assembly works so well in winter.
Read More
Topics:
Steel Studs,
building,
fasteners,
pneumatic tools,
ET&F,
steel framing
Construction work is never completely free of the potential for accidents and unsafe situations. While you and your crew are working outdoors during the winter months, it can become especially prone to happening. However, these effective cold-weather safety tips can reduce the chance of accidents and costly time delays. These tips cover the most essential steps you can take to keep your team safe and your project on budget.
Read More
Topics:
building,
Staples,
pneumatic tools,
Staplers,
bradders
If you have a builder in your life, you know that receiving a new set of power tools from a solid brand would be the ultimate gift this holiday season. There are some essential power tools that no construction kit is complete without. Luckily, BECK has your needs covered with a wide selection of rugged tools for any construction niche one might have. Let's dive into the details.
Read More
Topics:
pneumatic staplers,
Construction Fasteners,
Scrail Fasteners,
building,
Tools,
Staples,
pneumatic tools,
lignoloc,
Wooden Nails,
Staplers
The roof is the pinnacle of a building. When it comes to the roof of your house, you want stability and longevity, but aesthetics are also important. Modern home builders and home remodelers have many choices of common roof materials, including asphalt, aluminum, copper, steel, concrete, clay, tile and wood. Slate has been a popular roof material choice for many decades but comes with its own set of challenges that must be considered. Whether you are installing a new slate roof or repairing an old slate roof, here are a few of the challenges associated with slate roofs.
Read More
Topics:
Roofing,
Roofs,
pneumatic tools,
Slate Roofing
Installing flooring in a home or commercial property can be a complicated process that requires the utmost attention from your builders. Many modern floor materials are designed with longevity in mind, but they can still fail due to human error. To help you with your next project, let’s review some of the most common problems that lead to floor failure.
Read More
Topics:
floors,
pneumatic tools
.svg.png){kind=logo}
Like us
FOLLOW US
WATCH OUR VIDEOS
CALL US 800-239-TOOL (8665)
0 Comments Click here to read/write comments